PH 4123 is a permanent polyester tape on a heat cuttable filmic liner using a high performance permanent rubber adhesive and a higher coat weight than the PH4813 for higher performance. PH 4123 can be manufactured in red, blue or clear film and is produced in finger-lift for easily removal.

Liner: 50g filmic liner

Carrier: 17g polyester

Adhesive: synthetic rubber based with 50gsm on the open and 50gsm on the closed side

Total thickness: 162micron

Peel adhesion to steel (24-hour dwell) protected 1400 N/M open 1200 N/M

Shear adhesion to steel: protected 25 hours open 25 hours

Service temperature range: -20°C to 65°C

Recommended application temperature: 5°C to 50°C

Shelf life: Recommended 12 months from supply

Sealing of polyethylene and polypropylene bags

Based on supplier information the components of the adhesive conform to the compositional requirements of F&DA 175.105 for indirect food contact. Additional to this compliance there should also be a functional barrier between adhesive and the food. Such functional barrier and determination of suitability are the responsibility of the customer.

PH 4123 Is available in all finger-lift sizes and also in pancake rolls or spools

Issued: 15/09/16

Email: sales@phoenixdst.co.uk